| Model no: |
IF 908
|
| Channel: |
Dual, isolated between channels
|
| Weight: |
Approximately 150 grams battery included
|
| Amplitude: |
Adjustable 0-60mA peak into 500 ohm load each
|
| Carrier Frequency: |
4000Hz, Fixed (CH1
|
| Modulating Frequency: |
4-160bps, Adjustable (CH2
|
| IF Frequency Modes: |
9 modes, 1 constant mode, 5 frequency 3 auto sweep Modes
|
| Constant Mode: |
4-160bps, Adjustable
|
| Auto Sweep: |
4-45 bps, 80-145 bps, 4-SET bps
|
| Frequency Shift: |
Five modes, 1/1 abrupt shift, 6/6 abrupt shift, 6/6 ramped, 10/10 abrupt shift, 10/10 ramped, bps adjustable
|
| Sweep Time: |
15 seconds
|
| Frequency Shift percent: |
Frequency shifts from 30% Percent below the set frequency to 60% above and then return to 30% below the set frequency.
|
| Output Configuration Wave form: |
Quad polar (4 electrodes Symmetrical Balanced Sine Wave
|
| Interference Pulse Frequency: |
4-160 bps, Adjustable, 4bps/step bps/step
|
| Pulse Duration: |
125 Ìs maximum
|
| Patient Compliance: |
Display total treatment time Meter
|
| Lock: |
Prevents the patient from accidentally changing any of the set parameters
|
| Timer: |
15, 30 minute selectable
|
| LCD: |
Displays mode, bps rate, abrupt/ramp, timer, and channels
|
| Max charge per Pulse: |
15 Micro-coulombs Maximum
|
| Low Battery: |
A low battery indicator will show when the battery is low
|
| Power Source: |
9 Volt DC adaptor, 500mA or 9
|
| Tolerance: |
volt alkaline battery (not recommend due its short life) There may be +/-10% tolerance of settings and 20% tolerance of output.
|
| Dimensions: |
107x62x27mm
|
